User Contributed MET/CAL PROCEDURE ============================================================================= INSTRUMENT: PM 2502 VERIFICATION PROCEDURE (Ver1.0) DATE: 03-Oct-93 AUTHOR: User Contributed REVISION: 1.0 ADJUSTMENT THRESHOLD: 70% NUMBER OF TESTS: 35 NUMBER OF LINES: 90 CONFIGURATION: Fluke 5700A ============================================================================= * 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� * Source: Service Manual PM P/N: @ * 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� * TUR Configuration: * 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� * When the T.U.R. is < 2:1, the source instrument, e.g. 5700A, must be * characterized and appropriate corrections entered in the correction file * (e.g. 5700.COR). Where T.U.R.'s are > 2:1 but < 4:1, the test tolerance * is reduced by root sum square (rss) techniques. * 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� * This procedure is not executable in MET/CAL versions below ver. 2.00 * 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� * Fluke make no warranty, expressed or implied, as to the fitness or * useability of this procedure. * 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� * Main Procedure TESTS: Verification * 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� * The following subprocedures are called from this main procedure: * 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� STEP FSC RANGE NOMINAL TOLERANCE MOD1 MOD2 3 4 CON 1.001 ASK- R P M F L W 1.002 DISP ! CHECK THE POSITIVE AND NEGATIVE BATTERIES BY 1.002 DISP ! SELECTING THE APPROPRIATE FUNCTION BEFORE 1.002 DISP ! VERIFICATION OF THE INSTRUMENT 1.002 DISP ! THEN CHECK ZERO IN DC-V AS WELL AS IN AC-V 1.003 HEAD 1.004 DISP [27][91]1m Connect as follows 1.004 DISP ! 컴컴컴컴컴컴컴컴컴컴컴컴컴 1.004 DISP ! [27][91]1m 5700 UUT 1.004 DISP ! Sense HI 컴컴컴컴커 1.004 DISP ! Output HI 컴컴컴컴컨�> Volt/Ohm Input 1.004 DISP ! Output LO 컴컴컴컴컫�> Common 1.004 DISP ! Sense LO 컴컴컴컴켸 1.005 HEAD { DC VOLTAGE PERFORMANCE VERIFICATION} 1.006 DISP SELECT THE +DC VOLTS FUNCTION 1.007 5700 100mV 3.00% 2W 2.001 5700 300mV 1.50% 2W 3.001 5700 1V 1.50% 2W 4.001 5700 3V 1.5% 2W 5.001 5700 10V 1.5% 2W 6.001 DISP SELECT THE -DC VOLTS FUNCTION 6.002 5700 -10V 1.5% 2W 7.001 DISP SELECT THE +DC VOLTS FUNCTION 7.002 5700 30V 1.5% 2W 8.001 5700 100V 1.5% 2W 9.001 5700 300V 1.5% 2W 10.001 5700 1000V 1.5% 2W 11.001 HEAD {ALTERNATING VOLTAGE PERFORMANCE VERIFICATION} 11.002 DISP SELECT THE AC-VOLTS FUNCTION 11.003 5700 1V 2.5% 60H 2W 12.001 5700 3V 2.5% 60H 2W 13.001 5700 10V 2.5% 60H 2W 14.001 5700 10V 5% 3kH 2W 15.001 5700 30V 2.5% 60H 2W 16.001 5700 100V 2.5% 60H 2W 17.001 5700 300V 2.5% 60H 2W 18.001 5700 1000V 2.5% 60H 2W 19.001 HEAD {RESISTANCE PERFORMANCE VERIFICATION} 19.002 DISP SELECT THE BUZZER AND AC FUNCTION 19.003 5700 1Z S 4W 19.004 DISP SELECT THE +DC VOLTS FUNCTION AND *1 OHM RANGE 19.005 HEAD {ADJUST *1 OHM RANGE TO 0 OHM} 19.006 5700 0Z 99% 2W 20.001 HEAD {*1 OHM VERIFICATION} 20.002 5700 19Z 8% 4W 21.001 HEAD {ADJUST *100 OHM RANGE TO 0 OHM} 21.002 5700 0Z TOL 2W 22.001 HEAD {*100 OHM VERIFICATION} 22.002 5700 1900Z 5% 4W 23.001 HEAD {ADJUST *10 KOHM RANGE TO 0 OHM} 23.002 5700 0Z TOL 2W 24.001 HEAD {*10 KOHM VERIFICATION} 24.002 5700 190kZ 5% 2W 25.001 HEAD {DC CURRENT PERFORMANCE VERIFICATION} 25.002 DISP SELECT +DC FUNCTION 100uA RANGE 25.003 5700 100uA 2.5% 2W 26.001 5700 1mA 2.5% 2W 27.001 5700 10mA 2.5% 2W 28.001 5700 100mA 2.5% 2W 29.001 5700 1A 2.5% 2W 30.001 HEAD {AC CURRENT PERFORMANCE VERIFICATION} 30.002 DISP SELECT AC FUNCTION 30.003 5700 100uA 2.5% 60H 2W 31.001 5700 1mA 2.5% 60H 2W 32.001 5700 10mA 2.5% 60H 2W 33.001 5700 100mA 2.5% 60H 2W 34.001 5700 1A 2.5% 60H 2W 35.001 HEAD 35.002 DISP [27][91]1m PLEASE SWITCH THE PM2502 FROM THE AC FUNCTION 35.002 DISP [27][91]1m TO THE OHMS DC FUNCTION, PREFERABLY WITH THE 35.002 DISP [27][91]1m DIAL IN A HIGH VOLTAGE RANGE 35.002 DISP [D1000][007][D800][007][D600][007][D500][007] 35.002 DISP [D400][007][D300][007][D200][007][D100][007] 35.002 DISP [D80][007][D60][007][D50][007][D40][007][D30][007] 35.003 DISP ! P R O C E D U R E C O M P L E T E 35.003 DISP ! Disconnect all cables 35.003 DISP ! [27][91]7m Complete required paperwork 35.004 END